Cobell Door Phone Intercom
Cobell door phone intercom is Patent design, It connects to network via Wifi router or network cable. Mobile devices including smart phones or Tablets, could connect to the doorbell. After the visitor rings, mobile devices could interact with doorbell via real time video and audio, unlock, take photos, take videos, and give warning to visitor. P2P cloud service could push messages of visitor calling and alarms. Cobell door phone intercom has capabilities of anti-removal alarm, PIR, infrared night view.
Cobell door phone intercom that lets you answer the door from your smart phone, allows you to see, hear and talk to your visitor from an iOS or Android mobile device with Wi-Fi or 3G/4G coverage.– anywhere in the world! Please Note :We Will Send Randomly!! LOGO COBELL Or Without LOGO COBELL If you have any ideas, Please leave a message to us!!!
HD WiFi Doorbell
|Model:||HD WiFi Doorbell|
|Chipset||Chipset Solution||HiSilicon 3518E|
|Image Sensor||Image Sensor||Color CMOS sensor|
|Lens||Lens Type||Glass Lens|
|Angle of view||135°|
|Audio||Input/Output||Built-in two-way audio|
|Image Frame Rate||1-25fps|
|Night Visibility||4pcs IR-LEDS, Night vision up to 10 meters|
|Light Frequency||50Hz, 60Hz|
|Network||Ethernet||10/100Mbps RJ-45 port (Optional)|
|Protocol||TCP/IP, UDP, DHCP, P2P|
|Wireless Standard||IEEE 802.11b/g/n|
|Data Rate||IEEE802.11b: 11Mbps(Max.)
|Wireless Security||WEP, WPA, WPA2|
|App||By Phone||Android, iOS|
|Power||Power Supply||12~24VAC/0.5A(12VDC optional)|
HOW TO USE IT？
Download the “WIDI DOORBEL HD” app from Google Play Store or App Store to your android or iOS device. Make sure your android or iOS device connected to the local Wi-Fi successfully. Step 1: Power-on the wireless doorbell with an external 12V DC adaptor. Step 2: Wait about 40 seconds until hear the voice: “Welcome to smart home”. Step 3: Then the doorbell will be under the SmartLink Config Mode: The indicator light keeps flashing. If the doorbell is not under the SmartLink Config Mode, please RESET it to the config mode. How: Hold the RESET button at least 10 seconds, the device will be restarted and reset. Where: Reset button on the backside of the doorbell which is under the “Reset” sticker. Note: 1.Please choose SmartLink mode for setting the Wi-Fi at the first time. 2.Please make sure your android or iOS device connected to the local Wi-Fi successfully. 3.Networked Devices mode is only suitable for setting the Wi-Fi when the doorbell connected with a network cable(RJ45), or for adding a doorbell which has been connected to the Wi-Fi already. Step 4: Run the App and click “Add Device” Step 5: Click “SmartLink”, check the SSID, input the correct password, click “Start”, and then the doorbell will start to connect to your local Wi-Fi. Step 6 : Once hear the voice prompt “Successful” means the Wi-Fi SmartLink setup successfully. “Refresh” and click the UDID of the doorbell to add it to the device list automatically, “Refresh” and it will be online.